블루투스 연결을 통해 REST 기반 웹 서비스에 액세스 할 수있는 두 장치 사이에 블루투스 PAN을 만들려고합니다. 다양한 개념 증명 (Bluetooth 레거시 및 Bluetooth Smart 모두)에서 약간의 성공을 거두었지만 그룹 네트워크 또는 PANU <-> PANU 네트워크를 만드는 데 문제가 있습니다. 네트워크 액세스 포인트 시나리오를 사용하여 네트워크를 작동시킬 수 있지만 사용 사례는 다른 장치 또는 네트워크로 라우팅하지 않고 다른 단일 장치와 통신하는 단일 장치 여야합니다.
우선 최신 Raspbian OS가 포함 된 Raspberry Pi가 있습니다. 이것은 bluez 5.23과 함께 제공됩니다. 네트워크 액세스 포인트를 작동 시키려면 다음 코드를 사용하고 있습니다.
brctl addbr pan0
brctl setfd pan0 0
brctl stp pan0 off
ifconfig pan0 inet6 add fd00::5ef3:70ff:xxxx:xxxx
iplink set pan0 up
bt-network –d –s nap pan0
이것은 훌륭하게 작동하며 Linux 및 Windows 장치를 모두 연결할 수 있습니다. 또한 연결된 장치에서 Raspberry Pi에서 실행되는 Apache 웹 서버에 액세스 할 수 있습니다.
Linux 장치에서 blueman을 사용하여 연결합니다. 또한 bt-network를 –c 옵션과 함께 사용하여 연결했습니다. Windows 장치 (Windows 10 태블릿)의 경우 장치를 페어링 한 다음 Bluetooth 개인 영역 네트워크 장치 화면에서 네트워크에 연결합니다. 연결하기 전에 두 장치를 모두 신뢰하려면 bluetoothctl을 사용해야했습니다.
NAP가 작동하면서이 문서에 설명 된대로 그룹 네트워크 또는 panu-panu 네트워크가 작동하도록하려고했습니다. http://www.bluetooth.org/docman/handlers/downloaddoc.ashx?doc_id=6554 이러한 시나리오는 추가 네트워크 나 장치로 라우팅하고 싶지 않기 때문에 가장 효과적입니다 (panu-panu 시나리오가 이상적임)
내 생각은 bt-network 명령을 다음 두 명령 중 하나로 변경하는 것입니다.
bt-network –d –s gn pan0
bt-network –d –s panu pan0
이 두 명령은 모두 오류로 시작되지만 Linux 또는 Windows 장치간에 네트워크 연결을 설정할 수 없습니다. 장치를 성공적으로 페어링 할 수 있지만 ( “hciconfig hci0 piscan”명령을 사용하여 광고하고 있음) 네트워크를 작동시킬 수 없습니다.
hcidump를 실행하면 다음과 같은 결과가 나타납니다. 참고 연결 시도에서 전체 hcidump를 포함 시켰으므로 꽤 길지만 문제를 식별하는 데 도움이 될 수 있다고 생각했습니다. 이것은 그룹 네트워크 용이지만 panu-panu 시나리오와 동일한 오류가 발생합니다.
HCI sniffer - Bluetooth packet analyzer ver 5.23
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 5C:F3:70:66:XX:XX class 0x000000 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 5C:F3:70:66:XX:XX role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 5C:F3:70:66:XX:XX role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 11 bdaddr 5C:F3:70:66:XX:XX type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 11 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 11
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 11 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 11 page 1 max 1
Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 5C:F3:70:66:XX:XX mode 2 clkoffset 0x0000
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 5C:F3:70:66:XX:XX name 'raspberrypi'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 5C:F3:70:66:XX:XX capability 0x01 oob 0x00 auth 0x03
Capability: DisplayYesNo (OOB data not present)
Authentication: Dedicated Bonding (MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 5C:F3:70:66:XX:XX
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 5C:F3:70:66:XX:XX capability 0x03 oob 0x00 auth 0x02
Capability: NoInputNoOutput (OOB data not present)
Authentication: Dedicated Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 5C:F3:70:66:XX:XX
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 5C:F3:70:66:XX:XX passkey 774674
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 5C:F3:70:66:XX:XX
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 5C:F3:70:66:XX:XX
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 5C:F3:70:66:XX:XX
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 5C:F3:70:66:XX:XX key 839802CBF65CA6D1D864F91831A288B0 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 3
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 3
< ACL data: handle 11 flags 0x00 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000006
L2CAP Signalling Channel
L2CAP Connless
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000006
L2CAP Signalling Channel
L2CAP Connless
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 11 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
< ACL data: handle 11 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 672
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 672
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x0100 (L2CAP)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 11 flags 0x00 dlen 606
L2CAP(d): cid 0x0040 len 602 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x255
count 594
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10001
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1800 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1f > <
uuid-16 0x0007 uint 0x1 uint 0x8 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x000a (DocURL)
url "http://www.bluez.org/"
aid 0x000b (ClientExeURL)
url "http://www.bluez.org/"
aid 0x000c (IconURL)
url "http://www.bluez.org/"
aid 0x0100 (SrvName)
str "Generic Access Profile"
aid 0x0102 (ProviderName)
str "BlueZ"
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1801 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x1f > <
uuid-16 0x0007 uint 0x10 uint 0x10 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0100 (SrvName)
str "Generic Attribute Profile"
aid 0x0102 (ProviderName)
str "BlueZ"
record #2
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-16 0x110e (AVRemote) uuid-16 0x110f (AVRemCt) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x17 > <
uuid-16 0x0017 (AVCTP) uint 0x103 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x110e (AVRemote) uint 0x105 > >
aid 0x000d (AdditionalProtocolDescLists)
< < < uuid-16 0x0100 (L2CAP) uint 0x1b > < uuid-16 0x0017 (AVCTP) uint 0x103 > > >
aid 0x0100 (SrvName)
str "AVRCP CT"
aid 0x0311 (SuppFeatures)
uint 0x4f
record #3
aid 0x0000 (SrvRecHndl)
uint 0x10004
aid 0x0001 (SrvClassIDList)
< uuid-16 0x110c (AVRemTarget) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0x17 > <
uuid-16 0x0017 (AVCTP) uint 0x103 > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x110e (AVRemote) uint 0x104 > >
aid 0x000d (AdditionalProtocolDescLists)
< < < uuid-16 0x0100 (L2CAP) uint 0x1b > < uuid-16 0x0017 (AVCTP) uint 0x103 > > >
aid 0x0100 (SrvName)
str "AVRCP TG"
aid 0x0311 (SuppFeatures)
uint 0x5f
record #4
aid 0x0000 (SrvRecHndl)
uint 0x10005
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1117 (GN) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) uint 0xf > <
uuid-16 0x000f (BNEP) uint 0x100 < uint 0x800 uint 0x806 > > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0006 (LangBaseAttrIDList)
< uint 0x656e uint 0x6a uint 0x100 >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1117 (GN) uint 0x100 > >
aid 0x0100 (SrvName)
str "Network service"
aid 0x0101 (SrvDesc)
str "Network service"
aid 0x030a (SecurityDescription)
uint 0x1
cont 00
> ACL data: handle 11 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 1]
SDP SSA Req: tid 0x1 len 0xf
pat uuid-16 0x1200 (PNPInfo)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 11 flags 0x00 dlen 88
L2CAP(d): cid 0x0040 len 84 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x4f
count 76
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10000
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1200 (PNPInfo) >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1200 (PNPInfo) uint 0x103 > >
aid 0x0200 (VersionNumList)
uint 0x103
aid 0x0201 (SrvDBState)
uint 0x1d6b
aid 0x0202 (unknown)
uint 0x246
aid 0x0203 (unknown)
uint 0x517
aid 0x0204 (unknown)
bool 0x1
aid 0x0205 (unknown)
uint 0x2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 11 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 5C:F3:70:66:XX:XX class 0x000000 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 5C:F3:70:66:XX:XX role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 5C:F3:70:66:XX:XX role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 5C:F3:70:66:XX:XX type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 1
Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 5C:F3:70:66:XX:XX mode 2 clkoffset 0x0000
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 5C:F3:70:66:XX:XX name 'raspberrypi'
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 5C:F3:70:66:XX:XX
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 5C:F3:70:66:XX:XX key 839802CBF65CA6D1D864F91831A288B0
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 5C:F3:70:66:XX:XX
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 12 encrypt 0x01
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 3
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 2
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 3
< ACL data: handle 12 flags 0x00 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000006
L2CAP Signalling Channel
L2CAP Connless
> ACL data: handle 12 flags 0x02 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000006
L2CAP Signalling Channel
L2CAP Connless
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 2
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 3 status 0
Connection refused - security block
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 2
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x13
Reason: Remote User Terminated Connection
이 덤프가 끝나면 “연결이 거부되었습니다-보안 차단”이라는 오류가 발생합니다. 나는 이것이 문제라고 생각하지만 양쪽 끝에서 장치를 신뢰할 수 있습니다. 서버 유형으로 gn 또는 panu를 사용하거나 Linux 또는 Window 장치에서 연결하려고 할 때도 동일한 오류가 발생합니다.
NAP (Network Access Point)에 대한 많은 예를 볼 수 있지만 그룹 또는 panu 네트워크에 대한 예를 찾는 데 어려움을 겪고 있습니다. bt-network (bluez 5.23)를 사용하여 그룹 또는 panu 네트워크를 얻는 데 성공한 사람이 있습니까? 나는 단순히 무언가를 놓치고 있습니까? 도움을 주시면 감사하겠습니다.
감사
존
답변
Bluetooth 가젯의 경고 영역에서 기호를 마우스 오른쪽 단추로 클릭하고 개별 지역 정렬 조인을 선택하십시오. Bluetooth 가젯의 요약이 표시됩니다. …
연결할 PC 이름을 누릅니다. 이 가젯의 속성 페이지가 표시되는 시점에서 확인을 클릭하여이 페이지를 닫으십시오.
스냅 연결 사용.