- Linux Mint 16 (Petra)을 실행 중입니다
- 배포판과 함께 제공된 기본 드라이버 nvidia-319를 실행 중입니다.
- 2x GTX480 카드가 있습니다
- 3 개의 모니터가 있습니다
- Nvidia 드라이버를 사용하면 모든 모니터와 GPU가 독점 유틸리티에 의해 선택됩니다.
그러나 https://devtalk.nvidia.com/default/topic/719768/linux/304-121-ubuntu-14-04-xrandr-1-4-multi-gpu-not-being-detected 의 보고서와 유사 / xrandr –listproviders를 실행하면 첫 번째 카드 인 단일 공급자 만 표시됩니다. 나는 xrandr 1.4를 가지고 있으므로 둘 다 볼 수 있어야합니다. 별도의 X 화면을 설정 한 다음 xrandr –listproviders –screen 1을 수행하면 두 번째 카드를 볼 수 있습니다. 그러나 여러 개의 X 화면을 원하지 않습니다. 모니터간에 원활하게 흐를 수 있기를 원합니다.
나는 목에 통증이 있기 때문에 xiner를 실행하고 싶지 않으며 xrandr에 의해 대체되어야합니다.
nouveau 드라이버를 사용하면 원하는대로 세 화면을 모두 사용할 수 있지만 성능은 좋지 않습니다.
그래서 몇 가지 질문이 있습니다.
1.) 의도적으로 설계된 동작입니까, 버그입니까? 나는에주의 http://uk.download.nvidia.com/XFree86/Linux-x86/319.12/README/randr14.html 드라이버는 소스 출력 기능을 지원하는; xrandr에서 두 개의 다른 카드 공급자를 보지 못하게 하시겠습니까?
2.) 전자가 사실이라면이 문제를 해결할 수있는 방법이 있습니까?
3.) 나는 다양한 basemosaic 옵션을 가지고 놀았 지
내가 시도한 마지막 구성은 다음과 같습니다.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VS247"
HorizSync 24.0 - 83.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics W2243"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: unknown, VertRefresh source: unknown
Identifier "Monitor2"
VendorName "Unknown"
ModelName "AOC LM720/LM720A"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 480"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 480"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 480"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "BaseMosaic" "True"
Option "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "BaseMosaic" "True"
Option "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "Stereo" "0"
Option "BaseMosaic" "True"
Option "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
구성없이 실행할 때 X 로그는 다음과 같습니다.
[ 6.896]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 6.896] X Protocol Version 11, Revision 0
[ 6.896] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 6.896] Current Operating System: Linux theoria 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64
[ 6.896] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-12-generic root=UUID=3a6b3275-5e15-40c7-8de6-9eea1c63ebe1 ro quiet splash acpi_enforce_resources=lax
[ 6.896] Build Date: 17 December 2013 10:06:15AM
[ 6.896] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 6.896] Current version of pixman: 0.30.2
[ 6.896] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.896] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.896] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 9 07:12:33 2014
[ 6.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.897] (==) No Layout section. Using the first Screen section.
[ 6.897] (==) No screen section available. Using defaults.
[ 6.897] (**) |-->Screen "Default Screen Section" (0)
[ 6.897] (**) | |-->Monitor "<default monitor>"
[ 6.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.899] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 6.899] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 6.899] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.899] (II) Loader magic: 0x7fe4b0739d20
[ 6.899] (II) Module ABI versions:
[ 6.899] X.Org ANSI C Emulation: 0.4
[ 6.899] X.Org Video Driver: 14.1
[ 6.899] X.Org XInput driver : 19.1
[ 6.899] X.Org Server Extension : 7.0
[ 6.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.900] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.901] (--) PCI:*(0:1:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.901] (--) PCI: (0:2:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xf0000000/33554432, 0xd0000000/134217728, 0xd8000000/67108864, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 6.901] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.901] Initializing built-in extension Generic Event Extension
[ 6.901] Initializing built-in extension SHAPE
[ 6.901] Initializing built-in extension MIT-SHM
[ 6.901] Initializing built-in extension XInputExtension
[ 6.901] Initializing built-in extension XTEST
[ 6.901] Initializing built-in extension BIG-REQUESTS
[ 6.901] Initializing built-in extension SYNC
[ 6.901] Initializing built-in extension XKEYBOARD
[ 6.901] Initializing built-in extension XC-MISC
[ 6.901] Initializing built-in extension SECURITY
[ 6.901] Initializing built-in extension XINERAMA
[ 6.901] Initializing built-in extension XFIXES
[ 6.901] Initializing built-in extension RENDER
[ 6.901] Initializing built-in extension RANDR
[ 6.901] Initializing built-in extension COMPOSITE
[ 6.901] Initializing built-in extension DAMAGE
[ 6.901] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.901] Initializing built-in extension DOUBLE-BUFFER
[ 6.901] Initializing built-in extension RECORD
[ 6.901] Initializing built-in extension DPMS
[ 6.901] Initializing built-in extension X-Resource
[ 6.901] Initializing built-in extension XVideo
[ 6.901] Initializing built-in extension XVideo-MotionCompensation
[ 6.901] Initializing built-in extension SELinux
[ 6.901] Initializing built-in extension XFree86-VidModeExtension
[ 6.901] Initializing built-in extension XFree86-DGA
[ 6.901] Initializing built-in extension XFree86-DRI
[ 6.901] Initializing built-in extension DRI2
[ 6.901] (II) "glx" will be loaded by default.
[ 6.901] (WW) "xmir" is not to be loaded by default. Skipping.
[ 6.901] (II) LoadModule: "dri2"
[ 6.901] (II) Module "dri2" already built-in
[ 6.901] (II) LoadModule: "glamoregl"
[ 6.903] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.964] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6.964] compiled for 1.14.3, module version = 0.5.1
[ 6.964] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.964] (II) LoadModule: "glx"
[ 6.964] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 6.993] (II) Module glx: vendor="NVIDIA Corporation"
[ 6.993] compiled for 4.0.2, module version = 1.0.0
[ 6.993] Module class: X.Org Server Extension
[ 6.993] (II) NVIDIA GLX Module 319.60 Wed Sep 25 14:24:11 PDT 2013
[ 6.993] Loading extension GLX
[ 6.993] (==) Matched nvidia as autoconfigured driver 0
[ 6.993] (==) Matched nouveau as autoconfigured driver 1
[ 6.993] (==) Matched nvidia as autoconfigured driver 2
[ 6.993] (==) Matched nouveau as autoconfigured driver 3
[ 6.993] (==) Matched nvidia as autoconfigured driver 4
[ 6.993] (==) Matched nouveau as autoconfigured driver 5
[ 6.993] (==) Matched vesa as autoconfigured driver 6
[ 6.993] (==) Matched modesetting as autoconfigured driver 7
[ 6.993] (==) Matched fbdev as autoconfigured driver 8
[ 6.993] (==) Assigned the driver to the xf86ConfigLayout
[ 6.993] (II) LoadModule: "nvidia"
[ 6.994] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 7.001] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 7.001] compiled for 4.0.2, module version = 1.0.0
[ 7.001] Module class: X.Org Video Driver
[ 7.002] (II) LoadModule: "nouveau"
[ 7.002] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 7.004] (II) Module nouveau: vendor="X.Org Foundation"
[ 7.004] compiled for 1.14.2.901, module version = 1.0.9
[ 7.004] Module class: X.Org Video Driver
[ 7.004] ABI class: X.Org Video Driver, version 14.1
[ 7.004] (II) LoadModule: "vesa"
[ 7.004] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.005] (II) Module vesa: vendor="X.Org Foundation"
[ 7.005] compiled for 1.14.1, module version = 2.3.2
[ 7.005] Module class: X.Org Video Driver
[ 7.005] ABI class: X.Org Video Driver, version 14.1
[ 7.005] (II) LoadModule: "modesetting"
[ 7.005] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.006] (II) Module modesetting: vendor="X.Org Foundation"
[ 7.006] compiled for 1.14.1, module version = 0.8.0
[ 7.006] Module class: X.Org Video Driver
[ 7.006] ABI class: X.Org Video Driver, version 14.1
[ 7.006] (II) LoadModule: "fbdev"
[ 7.006] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.007] (II) Module fbdev: vendor="X.Org Foundation"
[ 7.007] compiled for 1.14.1, module version = 0.4.3
[ 7.007] Module class: X.Org Video Driver
[ 7.007] ABI class: X.Org Video Driver, version 14.1
[ 7.007] (II) NVIDIA dlloader X Driver 319.60 Wed Sep 25 14:04:14 PDT 2013
[ 7.007] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 7.007] (II) NOUVEAU driver Date: Wed Jul 31 10:51:03 2013 +1000
[ 7.007] (II) NOUVEAU driver for NVIDIA chipset families :
[ 7.007] RIVA TNT (NV04)
[ 7.007] RIVA TNT2 (NV05)
[ 7.007] GeForce 256 (NV10)
[ 7.007] GeForce 2 (NV11, NV15)
[ 7.007] GeForce 4MX (NV17, NV18)
[ 7.007] GeForce 3 (NV20)
[ 7.007] GeForce 4Ti (NV25, NV28)
[ 7.007] GeForce FX (NV3x)
[ 7.008] GeForce 6 (NV4x)
[ 7.008] GeForce 7 (G7x)
[ 7.008] GeForce 8 (G8x)
[ 7.008] GeForce GTX 200 (NVA0)
[ 7.008] GeForce GTX 400 (NVC0)
[ 7.008] (II) VESA: driver for VESA chipsets: vesa
[ 7.008] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7.008] (II) FBDEV: driver for framebuffer: fbdev
[ 7.008] (++) using VT number 7
[ 7.021] (II) Loading sub module "fb"
[ 7.021] (II) LoadModule: "fb"
[ 7.021] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.022] (II) Module fb: vendor="X.Org Foundation"
[ 7.022] compiled for 1.14.5, module version = 1.0.0
[ 7.022] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.022] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 7.022] (II) Loading sub module "wfb"
[ 7.022] (II) LoadModule: "wfb"
[ 7.022] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 7.024] (II) Module wfb: vendor="X.Org Foundation"
[ 7.024] compiled for 1.14.5, module version = 1.0.0
[ 7.024] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.024] (II) Loading sub module "shadow"
[ 7.024] (II) LoadModule: "shadow"
[ 7.024] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 7.025] (II) Module shadow: vendor="X.Org Foundation"
[ 7.025] compiled for 1.14.5, module version = 1.1.0
[ 7.025] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.025] (II) Loading sub module "ramdac"
[ 7.025] (II) LoadModule: "ramdac"
[ 7.025] (II) Module "ramdac" already built-in
[ 7.026] (EE) [drm] KMS not enabled
[ 7.026] (WW) Falling back to old probe method for vesa
[ 7.026] (WW) Falling back to old probe method for modesetting
[ 7.026] (WW) Falling back to old probe method for fbdev
[ 7.026] (II) Loading sub module "fbdevhw"
[ 7.026] (II) LoadModule: "fbdevhw"
[ 7.026] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.027] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 7.027] compiled for 1.14.5, module version = 0.0.2
[ 7.027] ABI class: X.Org Video Driver, version 14.1
[ 7.027] (EE) open /dev/fb0: No such file or directory
[ 7.027] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.027] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 7.027] (==) NVIDIA(0): RGB weight 888
[ 7.027] (==) NVIDIA(0): Default visual is TrueColor
[ 7.027] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.027] (**) NVIDIA(0): Enabling 2D acceleration
[ 7.627] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[ 7.627] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 7.656] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[ 7.656] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 7.657] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:1:0:0 (GPU-0)
[ 7.657] (--) NVIDIA(0): Memory: 1572864 kBytes
[ 7.657] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[ 7.657] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 7.659] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 480 at PCI:1:0:0
[ 7.659] (--) NVIDIA(0): LG Electronics W2243 (CRT-0) (boot, connected)
[ 7.659] (--) NVIDIA(0): CRT-1
[ 7.659] (--) NVIDIA(0): DFP-0
[ 7.659] (--) NVIDIA(0): DFP-1
[ 7.659] (--) NVIDIA(0): Ancor Communications Inc ASUS VS247 (DFP-2) (connected)
[ 7.659] (--) NVIDIA(0): LG Electronics W2243 (CRT-0): 400.0 MHz maximum pixel clock
[ 7.659] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 7.659] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 7.659] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 7.659] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 7.659] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 7.659] (--) NVIDIA(0): Ancor Communications Inc ASUS VS247 (DFP-2): 330.0 MHz maximum pixel clock
[ 7.659] (--) NVIDIA(0): Ancor Communications Inc ASUS VS247 (DFP-2): Internal Dual Link TMDS
[ 7.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.659] (**) NVIDIA(0): device LG Electronics W2243 (CRT-0) (Using EDID
[ 7.659] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 7.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.660] (**) NVIDIA(0): device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[ 7.660] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 7.660] (**) NVIDIA(0): devices.)
[ 7.661] (==) NVIDIA(0):
[ 7.661] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 7.661] (==) NVIDIA(0): will be used as the requested mode.
[ 7.661] (==) NVIDIA(0):
[ 7.661] (II) NVIDIA(0): Validated MetaModes:
[ 7.661] (II) NVIDIA(0): "CRT-0:nvidia-auto-select{},DFP-2:nvidia-auto-select{}"
[ 7.661] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 7.681] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 7.681] (--) NVIDIA(0): option
[ 7.681] (II) UnloadModule: "vesa"
[ 7.681] (II) Unloading vesa
[ 7.681] (II) UnloadModule: "fbdev"
[ 7.681] (II) Unloading fbdev
[ 7.681] (II) UnloadSubModule: "fbdevhw"
[ 7.681] (II) Unloading fbdevhw
[ 7.681] (--) Depth 24 pixmap format is 32 bpp
[ 8.500] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[ 8.571] (II) NVIDIA(GPU-1): Display (AOC LM720/LM720A (CRT-0)) does not support NVIDIA 3D
[ 8.571] (II) NVIDIA(GPU-1): Vision stereo.
[ 8.575] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:2:0:0 (GPU-1)
[ 8.575] (--) NVIDIA(GPU-1): Memory: 1572864 kBytes
[ 8.575] (--) NVIDIA(GPU-1): VideoBIOS: 70.00.21.00.02
[ 8.575] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[ 8.575] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 480 at PCI:2:0:0
[ 8.575] (--) NVIDIA(GPU-1): AOC LM720/LM720A (CRT-0) (boot, connected)
[ 8.575] (--) NVIDIA(GPU-1): CRT-1
[ 8.575] (--) NVIDIA(GPU-1): DFP-0
[ 8.575] (--) NVIDIA(GPU-1): DFP-1
[ 8.575] (--) NVIDIA(GPU-1): DFP-2
[ 8.575] (--) NVIDIA(GPU-1): AOC LM720/LM720A (CRT-0): 400.0 MHz maximum pixel clock
[ 8.575] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
[ 8.575] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[ 8.575] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[ 8.575] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[ 8.575] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[ 8.575] (--) NVIDIA(GPU-1): DFP-2: 330.0 MHz maximum pixel clock
[ 8.575] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS
[ 8.575] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 8.575] (II) NVIDIA: access.
[ 8.579] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select{},DFP-2:nvidia-auto-select{}"
[ 8.662] Loading extension NV-GLX
[ 8.755] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 8.755] (==) NVIDIA(0): Backing store disabled
[ 8.755] (==) NVIDIA(0): Silken mouse enabled
[ 8.755] (==) NVIDIA(0): DPMS enabled
[ 8.756] Loading extension NV-CONTROL
[ 8.756] Loading extension XINERAMA
[ 8.756] (II) Loading sub module "dri2"
[ 8.756] (II) LoadModule: "dri2"
[ 8.756] (II) Module "dri2" already built-in
[ 8.756] (II) NVIDIA(0): [DRI2] Setup complete
[ 8.756] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 8.756] (--) RandR disabled
[ 8.759] (II) SELinux: Disabled on system
[ 8.759] (II) Initializing extension GLX
[ 8.771] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 8.776] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.776] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 666.012] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[ 666.012] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 666.012] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 666.012] (**) NVIDIA(0): device LG Electronics W2243 (CRT-0) (Using EDID
[ 666.012] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 666.043] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[ 666.043] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 666.043] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 666.043] (**) NVIDIA(0): device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[ 666.043] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 666.043] (**) NVIDIA(0): devices.)
[ 666.204] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-3: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 666.236] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 666.345] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[ 666.345] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 666.345] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 666.345] (**) NVIDIA(0): device LG Electronics W2243 (CRT-0) (Using EDID
[ 666.345] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 666.376] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[ 666.376] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 666.376] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 666.376] (**) NVIDIA(0): device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[ 666.376] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 666.376] (**) NVIDIA(0): devices.)
[ 667.413] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[ 667.413] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 667.413] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 667.413] (**) NVIDIA(0): device LG Electronics W2243 (CRT-0) (Using EDID
[ 667.413] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 667.444] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[ 667.444] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 667.444] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 667.444] (**) NVIDIA(0): device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[ 667.444] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 667.444] (**) NVIDIA(0): devices.)
[ 667.560] (II) XKB: reuse xkmfile /var/lib/xkb/server-7996F6726817F73651B9DE0FDA11E35FC4524568.xkm
[ 667.568] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.724] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.727] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.730] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.733] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.736] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.739] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 668.742] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[ 687.505] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[ 687.505] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 687.505] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 687.505] (**) NVIDIA(0): device LG Electronics W2243 (CRT-0) (Using EDID
[ 687.505] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 687.536] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[ 687.536] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 687.536] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 687.536] (**) NVIDIA(0): device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[ 687.536] (**) NVIDIA(0): EDID frequencies has been enabled on all display
[ 687.536] (**) NVIDIA(0): devices.)
[ 1212.601] (II) evdev: Eee PC WMI hotkeys: Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.601] (II) evdev: USB USB Keykoard: Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.601] (II) evdev: USB USB Keykoard: Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.601] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.601] (II) evdev: Power Button: Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.601] (II) evdev: Power Button: Close
[ 1212.601] (II) UnloadModule: "evdev"
[ 1212.860] (EE) Server terminated successfully (0). Closing log file.
어떤 도움이라도 대단히 감사하겠습니다.
답변
Martin- 2008 년경 엔비디아 GT9800 한 쌍을 제외하고는 아주 비슷한 설정입니다. 또한 온보드 Intel HD4000 (바이오에서 비활성화). xrandr는 1 gpu 만 보였지만 다른 모든 시스템 관련 도구는 두 가지를 모두 올바르게보고했습니다. 우분투 14.04 LTD 베타 2, NVIDIA 331.28 독점
어제 밤 성배 수정은 : 기본 모자이크! xorg.conf, nvidia x 서버 설정-> 기본 모자이크 활성화를 비운 다음 감지 된 각 디스플레이를 활성화하십시오. 모두 작동합니다! 1 개의 xscreen으로 빠른 외관의 멀티 GPU, 멀티 헤드 멀티 모니터 설정! 내 3 개의 디스플레이는 다른 해상도이고 하나는 세로 회전입니다. 우분투 설정-디스플레이조차도 3 개의 모니터를 모두 올바르게 표시합니다.
nvidia 331.28 전용 드라이버로 업그레이드하고 xorg.conf를 제거하고 기본 Mosaic를 다시 시도해보십시오.
-차드
➜ ~ nvidia-xconfig –query-gpu-info
Number of GPUs: 2
GPU #0:
Name : GeForce 9800 GT
UUID : GPU-56281125-01c7-ee85-b8b9-b3e5cf94b7c5
PCI BusID : PCI:1:0:0
Number of Display Devices: 1
Display Device 0 (CRT-0):
EDID Name : Samsung SyncMaster
Minimum HorizSync : 30.000 kHz
Maximum HorizSync : 81.000 kHz
Minimum VertRefresh : 56 Hz
Maximum VertRefresh : 75 Hz
Maximum PixelClock : 146.250 MHz
Maximum Width : 1680 pixels
Maximum Height : 1050 pixels
Preferred Width : 1680 pixels
Preferred Height : 1050 pixels
Preferred VertRefresh : 60 Hz
Physical Width : 470 mm
Physical Height : 300 mm
GPU #1:
Name : GeForce 9800 GT
UUID : GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d
PCI BusID : PCI:2:0:0
Number of Display Devices: 2
Display Device 0 (CRT-0):
EDID Name : Samsung SyncMaster
Minimum HorizSync : 30.000 kHz
Maximum HorizSync : 81.000 kHz
Minimum VertRefresh : 56 Hz
Maximum VertRefresh : 75 Hz
Maximum PixelClock : 140.000 MHz
Maximum Width : 1280 pixels
Maximum Height : 1024 pixels
Preferred Width : 1440 pixels
Preferred Height : 900 pixels
Preferred VertRefresh : 60 Hz
Physical Width : 410 mm
Physical Height : 270 mm
Display Device 1 (DFP-1):
EDID Name : Ancor Communications Inc ASUS VH242H
Minimum HorizSync : 30.000 kHz
Maximum HorizSync : 85.000 kHz
Minimum VertRefresh : 55 Hz
Maximum VertRefresh : 75 Hz
Maximum PixelClock : 160.000 MHz
Maximum Width : 1920 pixels
Maximum Height : 1080 pixels
Preferred Width : 1920 pixels
Preferred Height : 1080 pixels
Preferred VertRefresh : 60 Hz
Physical Width : 520 mm
Physical Height : 290 mm
아래는 내 xorg.conf-모든 x 서버 설정이 생성 된 것입니다. 그것은 매우 직설적이며 두 번째 GPU를 참조조차하지 않습니다.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
auto-select +3600+0 {rotation=right}, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-3: nvidia-auto-select +1680+180"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "metamodes" "GPU-56281125-01c7-ee85-b8b9-b3e5cf94b7c5.GPU-0.DVI-I-0: nvidia-auto-select +0+180, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-0: nvidia-auto-select +3600+0 {rotation=right}, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-3: nvidia-auto-select +1680+180"
Option "MultiGPU" "Off"
Option "SLI" "off"
Option "BaseMosaic" "on"
SubSection "Display"
Depth 24
EndSubSection
EndSection
답변
이 스레드는 많은 도움이되었지만 답변에 설명 된 것보다 더 많은 단계가 있었으므로 본인에게 도움이되는 세부 단계가 포함 된 의견을 남기겠다고 생각했습니다.
- “시스템 설정”의“드라이버 관리자”앱을 사용하여“nvidia-346”을 드라이버로 선택하십시오 (“nvidia-346- 업데이트”아님). “Apply Changes (변경 사항 적용)”를 클릭하십시오. 응용 프로그램 처리가 완료되면 아무 일도 일어나지 않습니다 (아무것도 설치되지 않고 프롬프트가 표시되지 않고 메시지가 표시되지 않습니다). 컴퓨터를 다시 시작하십시오 (NVIDIA 드라이버가 커널을 명백히 수정하고 전체 시스템을 다시 시작하면 설치가 진행되기 때문에 필요함).
- 재시작 후 Linux Mint가 시작되면 Cinnamon이 손상되고 모니터 중 2 개만 작동합니다. 시나몬을 고치려고 노력하지 마십시오. 이것은 쓸모없는 설치 경로로 이어질 것입니다.
- “터미널”앱을 시작하십시오. 작업 표시 줄의 응용 프로그램 목록에서 “터미널”이 신비적으로 빠져 있기 때문에 시나몬이 고장 나면 까다로울 수 있습니다! 바탕 화면을 마우스 오른쪽 버튼으로 클릭해도 손상됩니다. 내가 찾은 유일한 방법은 1 단계에서 만든 바로 가기를 사용하거나 Alt + F2 키보드 바로 가기를 사용하는 것입니다. 실행할 명령을 입력하라는 창이 나타나면 “sudo ls”를 사용하고 “터미널 사용”확인란을 선택하십시오. 터미널이 시작되면 Ctrl + Shift + T 키보드 단축키를 사용하여 새로운 터미널 탭을 엽니 다. 이제 sudo 비밀번호를 기다리는 원래 탭을 닫을 수 있습니다. 새 터미널 창을 시작하려면 언제든지이 작업을 수행해야합니다.
-
터미널에서 다음 명령을 실행하십시오.
sudo apt-add-repository ppa:xorg-edgers sudo apt-get update sudo apt-get upgrade sudo apt-get install nvidia-346 nvidia-settings sudo apt-get --purge remove xserver-xorg-video-nouveau sudo apt-get autoremove -
컴퓨터를 재부팅하십시오. 이를 수행하는 UI 버튼이 없으므로를 실행해야합니다
sudo reboot. -
컴퓨터를 다시 부팅해도 여전히 문제가 발생합니다. 7 단계와 8 단계에 대해 잘 모르겠습니다. 필요하지 않을 수도 있지만, 만일을 대비하여 여기에 포함하여 무엇이 잘못되었는지 알아 내려고 시도하면서이 작업을 수행했습니다.
-
그런 다음을 실행하십시오
sudo gedit /etc/default/grub. 편집기에서 다음을 정의GRUB_CMDLINE_LINUX_DEFAULT하고 변경 하는 행을 찾으십시오 .GRUB_CMDLINE_LINUX_DEFAULT="nomodeset" -
이제 터미널에서 다음을 실행하십시오.
sudo update-initramfs -u sudo update-grub2 sudo update-grub -
이제
sudo gedit /etc/X11/xorg.confX 구성 파일을 편집 하는 데 사용 하십시오. 이 단계는이 설정 파일을 편집하기위한 멋진 GUI가 없기 때문에 실수하고이 파일을 손상시킬 경우 (다음에 다시 부팅 할 때) 더 이상 GUI가없고 작동중인 콘솔이 없을 수도 있습니다. 이 파일을 먼저 백업하십시오. 백업 한 후에는 일반적으로 여기에 설명 된 사항을 따르십시오. https://www.martineve.com/2014/04/15/enabling-a-triple-head-3-monitor-setup-on-linux-mint -16-petra-with-2-nvidia-cards / 내가 만든 변경 사항은 다음과 같습니다.- “ServerLayout”섹션은 Screen 0 만 정의해야합니다. “Screen 1″을 정의하는 행이 없어야합니다. 그런 줄이 있다면 제거하십시오.
- “화면”섹션에서 다음을 확인하십시오.
- MultiGPU가 꺼져 있습니다
- SLI가 켜져 있습니다
- 슬림은 사실이다
- BaseMosaic이 참
- 마지막으로 다시 부팅하십시오. 돌아 오면 Cinnamon이 다시 작동해야하며 3 개의 모니터가 모두 다시 작동합니다. 이제 NVIDIA 설정 GUI를 사용하여 해상도 및 화면 위치 / 회전 등을 설정할 수 있습니다.