CentOS 6.2의 정적 IPv4 및 IPv6 구성 NetworkManager[8299]: <info> Activation (eth0) Stage 2

CentOS 6.2에서 정적 IPv4 및 IPv6 구성을 구성하려고합니다.

아래 구성은 완벽하게 작동합니다.

# ifconfig eth0 x.x.x.x/29
# route add defalt gw x.x.x.y

# ip addr add dev eth0 XXXX:C810:3001:D00::3/56
# ip -6 route add default XXXX:C810:3001:D00::1

그러나 재부팅 후이 구성을 유지하고 싶습니다.

그래서 다음과 같이 구성했습니다.

IPv6 활성화

[root@test network-scripts]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=test.net
NETWORKING_IPV6=yes

인터페이스 구성

[root@test network-scripts]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="static"
ONBOOT="yes"
HWADDR="2C:C3:AC:A8:C3:3E"
IPADDR=x.x.x.x
GATEWAY=x.x.x.x
NETMASK=255.255.255.248
TYPE=Ethernet
IPV6INIT=yes
IPV6ADDR=XXXX:C810:3001:D00::3/56
IPV6_DEFAULTGW=XXXX:C810:3001:D00::1

DNS1=208.67.222.222
DNS2=208.67.220.220
# Only DNS{1,2} according to /usr/share/doc/initscripts-9.03.27/sysconfig.txt
# DNS3=2620:0:ccc::2
# DNS4=2620:0:ccD::2

네트워크 재시작

[root@test network-scripts]# service network restart
Arrêt de l'interface eth0 :  État du périphérique&nbsp;: 3 (déconnecté)
                                                           [  OK  ]
Arrêt de l'interface loopback :                            [  OK  ]
Activation de l'interface loopback :                       [  OK  ]
Activation de l'interface eth0 :  État de connexion active&nbsp;: activation
État de chemin actif&nbsp;: /org/freedesktop/NetworkManager/ActiveConnection/3
état&nbsp;: activé
Connexion activée
                                                           [  OK  ]

[root @ test 네트워크 스크립트] # cat / var / log / message

Mar 13 14:32:13 test NetworkManager[8299]: <info> (eth0): device state change: 8 -> 3 (reason 39)
Mar 13 14:32:13 test NetworkManager[8299]: <info> (eth0): deactivating device (reason: 39).
Mar 13 14:32:13 test avahi-daemon[8311]: Withdrawing address record for x.x.x.x on eth0.
Mar 13 14:32:13 test avahi-daemon[8311]: Leaving mDNS multicast group on interface eth0.IPv4 with address x.x.x.x.
Mar 13 14:32:13 test avahi-daemon[8311]: Interface eth0.IPv4 no longer relevant for mDNS.
Mar 13 14:32:14 test kernel: lo: Disabled Privacy Extensions
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) starting connection 'System eth0'
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 3 -> 4 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 4 -> 5 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 5 -> 7 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Beginning IP6 addrconf.
Mar 13 14:32:14 test avahi-daemon[8311]: Withdrawing address record for fe80::1ec1:deff:feb8:a2fd on eth0.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Mar 13 14:32:15 test avahi-daemon[8311]: Registering new address record for fe80::1ec1:deff:feb8:a2fd on eth0.*.
Mar 13 14:32:35 test NetworkManager[8299]: <info> (eth0): IP6 addrconf timed out or failed.
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) started...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Mar 13 14:32:35 test avahi-daemon[8311]: Joining mDNS multicast group on interface eth0.IPv4 with address x.x.x.x.
Mar 13 14:32:35 test avahi-daemon[8311]: New relevant interface eth0.IPv4 for mDNS.
Mar 13 14:32:35 test avahi-daemon[8311]: Registering new address record for x.x.x.x on eth0.IPv4.
Mar 13 14:32:36 test NetworkManager[8299]: <info> (eth0): device state change: 7 -> 8 (reason 0)
Mar 13 14:32:36 test NetworkManager[8299]: <info> Policy set 'System eth0' (eth0) as default for IPv4 routing and DNS.
Mar 13 14:32:36 test NetworkManager[8299]: <info> Activation (eth0) successful, device activated.
Mar 13 14:32:36 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.

IPv6 구성이 작동하지 않습니다 …

[root@test network-scripts]# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 1c:c1:de:b8:a3:fd brd ff:ff:ff:ff:ff:ff
    inet x.x.x.x/29 brd x.x.x.x scope global eth0
    inet6 fe80::1ec1:deff:feb8:a3fd/64 scope link
       valid_lft forever preferred_lft forever

리졸버의 IPv6 주소는 resolv.conf에도 없습니다!

구성 단계를 놓쳤습니까?

나는 IPv6 구성이 형식적이라고 생각했다.

[root@test network-scripts]# lsb_release -a
LSB Version:    :core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID:    CentOS
Description:    CentOS release 6.2 (Final)
Release:    6.2
Codename:    Final

답변

Network Manager가 정적 구성 설정을 대체하려고합니다. 루트 또는 sudo 사용자로서 다음을 실행하십시오.

service NetworkManager stop

서비스가없는 경우 다음을 시도하십시오.

/etc/init.d/NetworkManager stop

또한 NetworkManager가 정적 인터페이스를 관리하지 않도록 설정할 수 있습니다. 이는 CentOS 구성에서 단순히 행을 추가하여 수행 한 작업입니다.

NM_CONTROLLED=no

정적 구성 파일에. 정적 구성 파일에는 해당 행이 없으므로 NetworkManager는 해당 인터페이스를 무시하지 않고 제어하려고 시도합니다.

NM 비활성화 및 / 또는 제거에 대한 참조 는 여기를 참조 하십시오 .

답변

이 네트워크 관리자가 정적 네트워크 구성 파일과 충돌하지 않습니까? 서버에서 CentOS를 실행하는 경우 네트워크 관리자를 비활성화하고 NM은 바보이며 네트워크 설정을 “동적으로”변경할 필요가 없습니다.

답변